Products

Home / Products / CJ-MLF PE/PA Microporous Precision Filter

CJ-MLF PE/PA Microporous Precision Filter

PE/PA microporous filter adopts sintered polyethylene peptic microporous pipe as a filtering medium, hanging PE / PA filter pipe in a vertical airtight body as filtering medium, and has a pneumatic slag discharge port at the bottom of the equipment, The filtration area per unit volume is large, and the operation is simple and convenient. The automatic and manual control is adopted. The PE / PA microporous filter has high filtration precision, which can reach 0.3 μm precision. lt has a good regeneration effect and can be used repeatedly. it is suitable for filtration of many acid-base and organic solvents.
PE/PA microporous filters have been widely used in the basic chemical industry, fine chemical industry, hydrometallurgy, chemical fertilizer, pharmaceutical, food, environmental protection, and other industries. it is suitable for precision filtration (such as the filtration of activated carbon decoloration solution, catalyst, ultra-fine crystal, etc.) with high treatment capacity, high solid content, and requirements for filter biscuit degree.

Product characteristics

● As a filter medium, PEPA microporous tube has high filtration precision, can be used repeatedly, and has a long service life.
● Strong acid and alkaline resistance.
● Continuous filtration under closed conditions has the advantages of high safety, convenient operation, low labor intensity, and small floor area.
● According to the requirements, the slag discharge port can be designed as manual type, butterfly valve type, ball valve type, pneumatic quick open type, and other forms.
● The bottom layer of the filter is equipped with a microporous tube, which makes the filtered residue dry, and the filtrate is filtered at one time, which is very good for intermittent filtration and filtration in which the upper and lower batches cannot be mixed.
● The raw materials can be stirred, washed, aerated, and filtered in the filter at one time, and the ideal effect can be achieved.
● According to the specific situation, the outer layer can be added with sandwich insulation.
● PE temperature resistance ≤ 90 ℃, PA temperature resistance < 110 ℃.
● PE / PA filter tube can resist acid, alkali, aldehyde, aliphatic hydrocarbon, and radioactive radiation; it has excellent chemical properties and organic solvent resistance; it can resist organic solvents such as ester ketone and ether below 80 '℃: it has good impact strength and is not easy to be damaged; its specific gravity is light and easy to install.


Working Principle

The material is pumped into the filter through the PEPA microporous tube, and the clean liquid flows out of the container and is discharged into the clean tank. After the filtration of the material is completed, the air source(nitrogen or compressed air)is introduced for pressure filtration. The liquid in the container is filtered. After that, the filter cake is blown dry, and then the bottom valve is opened for unloading. The filter cake is completely blown down by gas reverse-blowing. Close the bottom valve. Prepare for the next filter.



Scope of Application
● Each row of activated carbon filtration, catalyst recovery;
● Precision filtration of Chinese herbal medicine juice, Precision filtration of oral medicine, injection medicine, tonic liquid, medicinal wine, etc;
● Precision filtration of syrup for pharmaceutical and food use;
● Precise filtration of soy sauce, vinegar, etc;
● Precision filtration of fruit juice (apple juice, strawberry juice, hawthorn juice, etc.); iron mud filtration in pharmaceutical and chemical production.


Technical Parameter

Model CJ-MF-P2 CJ-MF-P5 CJ-MF-P10 CJ-MF-P20 CJ-MF-P30 CJ-MF-P40 CJ-MF-P60 CJ-MF-P100
Filtration  area(m²) 2  5  10  20  30  40  60  100 
processing capacity(m³/h) According to the experimental results
Design pressure (Mpa) ≤0.3
Design temperature(℃) ≤100
Cylinder diameter (mm) 300  600  800  900  1000  1200  1600  2000 
Cylinder  volume(m³) 0.138  0.61  1.19  1.4  2.08  3.35  4.42  6.23 
Slag discharge port 300  600  800  900  1000  1200  1600  2000 
Equipment height (mm) 1550  1550  2290  2380  2880  2760  3426  4270 
Contact Us
Recommended Products
  • CJRH Multifunctional (Three-In-One) Filter

    CJRH Multifunctional (Three-In-One) Filter

    Cjrh series multifunctional three-in-one filter is a multi-functional solid-liquid separation equipment integrating filtration, washing and drying. lt is widely used in fine chemicals, pesticides, pet...
  • CJMF-K Quick Opening Multi-Bag Filter

    CJMF-K Quick Opening Multi-Bag Filter

    CJMF multi-bag filter is suitable for use in high-flow situations. The number of filter bags can be combined from 2 to 36 bags, and the flow rate can range from 50m ³/h to 1000m ³/h. According to the ...
  • CJMF-O Ordinary Multi-Bag Filter

    CJMF-O Ordinary Multi-Bag Filter

    The ordinary multi-bag filter (CJMF-O) adopts a hanging ear bolt locking structure, which is economical and can be used in high-pressure situations. The filtration accuracy ranges from 1um to 1000um, ...
  • CJBS Concave Cover Single Bag Filter

    CJBS Concave Cover Single Bag Filter

    CJBS concave cover single bag filter adopts a clever concave cover structure design. The liquid enters the filter cylinder from the side and then fills the filter bag. The liquid flows out from the ou...
  • CJZT Automatic Candle Filter

    CJZT Automatic Candle Filter

    CJ-ZT high-efficiency filter is our company's self-developed filtering equipment, high-efficiency filter can be online filtration, washing, drying, unloading, reverse washing and other functions ...
  • CJBS Fully Automatic Plate Type Airtight Filter

    CJBS Fully Automatic Plate Type Airtight Filter

    CJBS series automatic plate type airtight filter is a kind of high efficiency, energy-saving and automatic airtight clarification equipment. It is widely used in chemical, petroleum, food, pharmaceuti...